Your browser is out of date. The site is optimized for IE 9 (not compatibility mode) and above, Chrome 29, Firefox 23 and Safari 6.0.
Skip to content
English
This site in other countries/regions:
Select Country to see regional site for AMETEK Land.
Deutsch
English
Française
日本語
中文
Login
Login
Toggle navigation
INDUSTRIES
Steel
Iron to Steel
Hot Rolling Mill
Cold Rolling
CAL - Continuous Annealing Line
CGL - Continuous Galvanizing Line
Rod Mill
Aluminium
Aluminium Strip Mill
Aluminium Extrusion Plant
Aluminium Forging
Aluminium Other Applications
Metal Ore Extraction and Refining
Platinum
Nickel
Copper
Calibration
Glass
Architectural Glass
Automotive Glass
Container
Fibreglass and Rockwool
Fibre-Optic Communication
Flat Glass
Glass Toughening and Bending
Speciality Glass
Tableware
Hydrocarbon & Petrochemical Industries (HPI)
Ammonia
Biomass to Syngas
Ethylene Cracker
Hydrogen
Methanol
Nitric Acid
Pet Coke to Syngas
Refining / Petrochemical
Reformer Surveying
Slurry to Syngas
Storage
Storage and Transportation
Industrial Processing
Ceramics
Chemical Processing
Forging
Heat Treatment
Medical Devices
Non-wovens
Paper
Plastic
Semiconductor Processing
Solar
Specialist Coating
Wood
Minerals
Brick
Cement
Lime
Asphalt / Roadstone / Tarmac
Energy
Batteries
Biomass
Coal
Cogeneration
Emissions Monitoring
Fire Prevention
Waste
Industrial Decarbonisation
Increase Energy Efficiency
Decarbonising Energy Supplies
Capturing Carbon Dioxide
PRODUCTS
Fixed Spot Non-Contact Thermometers / Pyrometers
SPOT+
SPOT+ AL - Aluminium Production and Processing Application Pyrometer
SPOT+ GS - Galvanized and Galvannealed Strip
SPOT+ MM - Liquid Metal and Tapping
SPOT+ TMT - Tube Metal Temperature
SPOT Actuator
System 4
Landmark Signal Processors
UNO
SOLOnet
RT8B
IQ
SPRINT 8
Furnace Gas Temperature - CDB
DTT - Drawing Tower
FG - Glass Forehearth
FLT5B - Float Line
SP - Spray Chamber
VDT+ Vapour Deposition
Fixed Thermal Imagers & Line Scanners
Fixed Thermal Imagers
Fixed Stationary Thermal Imagers
LWIR-640
LWIR-640 Special Applications
MWIR
NIR-656 & NIR-2K
Fixed Borescope Thermal Imagers
MWIR-b-640
NIR-b-640
NIR-b-640-EX
NIR-b-656/2K
Auto-Retraction Systems
Application-Specific Thermal Imaging Systems
Flare Stack Monitoring
NIR-Borescope-2K-Glass
SDS - Slag Detection System (SDS)
Linescanners & Systems
LSP-HD Linescanner
HotSpotIR 9000
Tempering Furnace
Portable Thermal Imagers
Light Portable Furnace Thermal Imaging System
Portable Infrared Thermometers
Cyclops L
Gold Cup Reference Pyrometer
Modular Gold Cup Reference Pyrometer
Hazardous Areas
EX SPOT
EX LWIR
Calibration Sources
Landcal
Combustion Efficiency Monitors
FGA Series
WDG 1200 & 1210 (Oxygen)
Thermal Surveys
In-Furnace Thermal Glass Surveys
Opacity and Dust Monitors
4500 MkIII (Opacity - US EPA PS-1 & ASTM D6216)
4750-PM (PM-CEMS - EN 15267)
4650-PM (PM-CEMS – QAL1)
4650-PM EXN (ONLY AVAILABLE IN CHINA)
4400 (Opacity – EN 15267)
Carbon Monoxide Detectors
Millwatch
Silowatch
Software
SPOT Firmware
SPOT Pyrometer Firmware - V1021.2
SPOT+ Pyrometer Firmware - V40.42
SPOT Pyrometer Firmware V32.14
SPOT Finder Utility - V1.0.0
SPOT Actuator Firmware - V2.8
SPOTPro
SPOTPro - Version 1.1.0 - FREE TRIAL
ImagerSDK
System 4 Firmware
System 4 Firmware - 50.08.02 - FREE DOWNLOAD
ImagePro V2
ImagePro Software V2.4.2 (including 30 day free trial)
ImagePro AFM (Advanced Furnace Monitoring) BETA
ImagePro AM (Asset Monitoring)
ImagePro Glass
LSPro (LSP-HD Landscan Processor Configuration Software)
LSPro Configurator Software V1.1.0 FREE DOWNLOAD
Landmark Technic Configurator
Landmark Technic Configurator - Version 3.0.0 - FREE DOWNLOAD
SOLOnet & IQ Configurator
SOLOnet & IQ Configurator - Version 2.0.2 - FREE DOWNLOAD
Landscan Windows Control and Analyse (WCA)
Landscan WCA Software V5.11.2
EasySpot - Sprint8 Configurator
FlowPro
Cyclops Logger (PC & Mobile)
Cyclops Logger Mobile - FREE DOWNLOAD
Cyclops Logger PC - Version 2.1.2 - FREE DOWNLOAD
Industry Application Specific
SD - Blast Furnace Stove Dome
Understrip
Product Warranty
AFTERMARKET SERVICES
Certification and Calibration
AMECare Heat Up Service
On-Site Services
Trade-in Program
Returns
LAND Service Centres
AMECare Service Programs
Technical & Application Support
LAND Training
Discontinued / Obsolete Products
LAND Product Documentation Resource Library
KNOWLEDGE
News
Global Newsletters
Events
Webinars
Calculators
Infrared Temperature Measurement Theory Calculator
Emissivity and Background Correction Calculator
Case Studies
Application Notes
Steel Application Notes
Aluminium Application Notes
Glass Application Notes
Hydrocarbon & Petrochemical Industries (HPI) Application Notes
Industrial Processing Application Notes
Metal Ore Application Notes
Minerals Application Notes
Plastics Application Notes
Power Generation Application Notes
Industry Magazines
Product and Industry Guides
Did you know? Special Applications
Blogs
ABOUT US
LAND Brand Guidelines
Partnerships
Become a Sales Partner
Careers
Industry & Product Managers
Senior Management
Quality Assurance
Terms and Conditions of Sale
FAQ
Part of AMETEK, Inc
CONTACT US
Get In Touch
Technical Support
LAND Offices
International Sales Partners
Stay Updated
News Sign Up
Web Stores
WEB STORES
CONTACT US
US WEB STORE
BLOG
Archives
Skip Navigation Links.
2026(1)
January(1)
Predicting Borescope Tip Temperatures with FlowPro
2025(18)
November(2)
What is a Traceable Calibration?
How NIR-b Thermal Imaging Improves Hybrid Furnace Performance
October(1)
Behind the Design: How the Modular Gold Cup Came to Life
September(3)
Slag Detection in Copper Smelting Operations
Liquid Aluminium Temperature Measurement During the Tapping Process
Driving Industrial Decarbonisation with LAND’s Thermal Imaging and Oxy-Gas Furnace Technology
August(4)
Temperature Measurement in Optical Fibre Production
Measuring Temperature in Aluminium Forging Processes
Inside the Furnace: What We Learned from Testing Air-Cooled Borescopes in the Real World
Optimising Aluminium Rolling with Accurate Temperature Measurements
July(2)
Thermal NIR-borescopes vs Visual Cameras: Why LAND Leads in Furnace Monitoring
Achieving Process Control using Precise Temperature Measurements in Aluminium Extrusion Processes
June(1)
Choosing the Right Instrument to Measure Reformer Tube Wall Metal Temperatures
May(1)
My Observations on the Growing Role of Thermal NIR-borescope Technology in Sustainable Glass Production
April(2)
The 1st Step to Steam Cracker Optimisation is Reliable Data
Selecting a Pyrometer for Temperature Measurements in Heat Treatment
March(2)
What is Emissivity?
How LAND's Technology Shapes the Future of Glass Manufacturing
2024(15)
December(1)
Optimising Steam Cracker Furnaces with Thermal Imaging
November(2)
What is the Best Tool for Detecting Hot Inclusions on a Conveyor?
How Can I Improve Temperature Control in my Glass Manufacturing Processes?
October(1)
Simple Steps to Replace Your MWIR-B-640 Protection Window
September(1)
Advanced Temperature Measurement in Heat Treatment Processes
August(1)
Protect Your People, Protect Your Profits, Prevent Battery Fires
July(2)
Revolutionising Strip Temperature Measurement with the LWIR-640
Enhancing Glass Furnace Operations with LAND
June(1)
Temperature Measurements in Hazardous Areas
May(2)
Black Liquor Recovery Boiler Smelt Bed Imaging
12 Ways to Maximise Efficiency and US EPA Compliance with LAND’s Opacity Monitor
April(2)
Using NIR-B-2K-Glass Borescopes to Optimise Production and Quality of Oxy-gas Furnaces
Optimising Slag Processing with SDS
March(1)
Why Does My Opacity Monitor Read Negative, and What Can I Do About It?
February(1)
How to Compare Two or More Pyrometer Temperature Measurements
2023(37)
November(4)
Importance of Reliable Slag Detection
How to Enhance Combustion with NIR-Bs to Reduce Emissions and Boost Energy Efficiency
Ensuring Quality and Control in Auto-pour Processes for Foundry Castings
Can I Measure Opacity When I Have Water in my Flue Gas?
October(2)
What is EtherNet/IP and Why Do I Need It?
How Critical is Measurement of Temperatures in the Aluminium Industry?
September(3)
Why Utilising Multiple NIR-B 2K Cameras on Float Glass Furnaces Extends Lifetime and Optimises Combustion
The Significance of Monitoring Rotary Kiln Hot Spots
What is an Opacity Monitor’s Installation Pathlength, and Why is it Important?
August(3)
Maximising Steel Production Efficiency and Safety Through Advanced Ladle Freeboard Monitoring
Industrial Thermal Imaging Benefits in Heat Treatment Applications
High Definition Furnace Thermal Imaging
July(4)
Why Should I Use Two NIR-Bs on Container Glass Furnaces?
Reducing Emissions and Improving Combustion Efficiency in Reheating Furnaces
Monitoring Batch Coverage with IMAGEPro Glass V2 for Furnace Balancing
Do I Need to Include Fail-safe Shutters on my Opacity Installation?
June(4)
STOP Using Skin Thermocouples for Tube Metal Temperatures
IMAGEPro V2 Glass Extension for Sharing Data to SCADA for Glass Furnaces
Harnessing the Power of Smart Thermal Imagers for Process Control Systems
Exploring Career Opportunities at AMETEK Land: Your Pathway to Success
May(4)
SPOT AL: Revolutionising Aluminum Extrusion with Precision Temperature Control
5 Practical Tips for Using the Gold Cup to Measure Tube Wall Temperatures
Measuring the Temperature of a Cement Kiln Using an Infrared Imager
Making Smart Investments in Non-Contact Temperature Measurement Technology
April(3)
INDUSTRY 4.0 & 5.0 in Non-contact Temperature Measurement Applications and Devices
Gas Concentration Measurements in Glass Melt Tanks with a Portable Gas Analyser
How to Use the New LWIR-640 and its IMAGEPro Software to Monitor the Exterior of a Glass Furnace and Avoid Glass Leaks
March(3)
What is Dual-Sensor Technology?
Maintaining the Reliability and Safety of Steam Methane Reformers through Outlet System Monitoring
Combining a Transportable NIR-B-2K & Lancom 4 for Thermal Surveys & Combustion Optimisation
February(4)
Using Fiber-Optic Instruments (FGs) for Live Temperature Monitoring in Container Glass Furnaces
Combustion Control in a Black Liquor Boiler
Benefits of Using Medium-wavelength (MWIR) Thermal Imagers Instead of Widely Used Long-wavelength (LWIR) Cameras
10 Reasons Why Thermal Cameras Are Preferred to Video Cameras for Furnace Monitoring.
January(3)
Steam Methane Reformer (SMR) Tube Metal Temperatures (TMT) Data Collection and Correction
How to Improve Temperature Gradient and Quality of Glass Ribbons Using The LSP-HD Linescanner
Understanding the Importance of 'HOT SPOT' Measurement in Non-Contact Temperature Measurement Applications
2022(31)
December(1)
What Are The Key Differences between VIS and IR Thermal Imagers?
November(2)
Measuring Gas Temperatures In Combustion Processes By Infrared Pyrometry
Combining a NIR-B-2K-Glass, a Cyclops L and a Lancom 4 to Improve Your Carbon Footprint and Reduce NOx Emissions in Glass Furnace Applications
October(3)
How an Uncalibrated Optical Pyrometer Can Affect Temperature Accuracy of TMT Readings on Steam Methane Reformers
Using Transportable NIR-B-2K Imager for Thermal Surveys and Combustion Optimisation to Reduce Energy
How to Measure Low Temperatures on Shiny Metal Surfaces
September(2)
What is Background Radiation? And Why is it Important to Compensate for it?
Reinforcing Cyclops Handheld Pyrometer Uses with NIR-B-2K Thermocouple Verification and Hot Spot Monitoring
August(3)
Thermal Imaging Accuracy for Furnace Applications
How Long Does My Lancom 4 Probe Need to Be?
Should I Choose an Air-cooled or Water-cooled Thermal Imaging Camera for my Furnace?
July(3)
Why Should You Use AMETEK Land Application Support to Choose the Right Pyrometer Instead of Purchasing Directly From the Internet?
Complete Open Gateways with the NIR-B-2K-Glass Thermal Imager to Have Digital 4.0 Data Exchange and SCADA
How Do I Perform an Audit on my Opacity Monitor?
June(4)
What Makes Stored Biomass Self-Ignite?
Optimising Fired Heaters using Thermal Imaging Solutions
Can the LWIR-640 be Used to Monitor the Refractory Condition of a Ladle?
What Are The Key Benefits of Using a SPOT Pyrometer with a SPOT Actuator?
May(3)
Reducing Energy Consumption & CO2 Emissions by using Continuous Furnace Outside Shell Monitoring with Stationary Industrial Thermal Imaging
Take a Tour Around The IMAGEPro Version 2 Software Interface
How to Set Glass Leak Alarms with the LWIR-640 Thermal Imager and Its IMAGEPro Software?
April(3)
Will a 1 µm and 3.9 µm Pyrometer or Thermal Imager Read the Same Tube Wall Temperatures (TWTs)? If Not, Which Value is Correct?
Do I Need a NOx Converter On My Flue Gas Monitor?
Will a 1 µm and 3.9 µm Pyrometer or Thermal Imager Read the Same Tube Wall Temperatures (TWTs)? If Not, Which Value is Correct?
March(2)
How to Use the NIR-Borescope-2K with IMAGEPro-Glass in Float Furnaces
How to Monitor the Outside Condition of a Glass Furnace?
February(4)
What Are NOx and SOx and Why Are They Important?
How to Spot Damage in Modern Lime Kilns Using Thermal Surveys
How can accurate temperature and emissions monitoring improve efficiency, quality and sustainability?
What non-contact temperature measurement technologies are being implemented into actual Industry 4.0 communications within heavy industries?
January(1)
Measuring Gas Temperatures in a Boiler with the CDA Pyrometer
2021(21)
December(2)
How to Determine Spectral Emissivities in Real Applications
Glass Melt Tank Thermal Surveys - A Starter to Reduce CO2 Footprint and Energy Savings
November(2)
Five Uses for Portable Flue Gas Analysers
Importance of Combustion Control and Emissions Monitoring in Steel Production
September(2)
Measuring Boiler Tube Temperature
How LSP-HD Linescanners Maintain High-definition Measurements at All Scan Speeds
August(2)
Viewing Fuel Flow in a Stoker-fired Boiler
How LSP-HD Linescanners Maintain High-definition Measurements at All Scan Speeds
July(4)
Why Choose AMETEK Land to Calibrate Your AMETEK Land Instruments?
Viewing Fuel Flow in a Fluidized Bed
What Are the Key Features and Applications of the SPOT AL EQS Pyrometer for the Temperature Measurement of Aluminium?
How To Achieve The Best Temperature Measurement Accuracy From Your Cyclops L?
June(2)
What is the Thermal Infrared Range? And What are NIR, SWIR, MWIR and LWIR?
Try The Interactive SPOT Pyrometer Simulator Demo
May(3)
What Are the Main Benefits of IMAGEPro Advanced Thermal Imaging Software?
We Have Just Released a New Walkthrough Video for Our US Web Store!
How to Achieve Precision Temperature Measurement of Liquid Metal in Foundries
April(2)
How to Monitor Batch Coverage and Crown Temperatures in a Glass Melt Tank for Optimised Daily Operations in Glass Furnaces
Can I Mount my Opacity Monitor on a Positive-Pressure Duct?
March(1)
How to Automatically Monitor the Condition of Vessels and Furnaces to Avoid Leaks or Identify Dangerous Outbreaks
February(1)
How Much Purge Air Does My Opacity Monitor Need?
2020(15)
December(1)
The Pros and Cons of Particulate Matter Monitors
October(3)
What is Your Plan if Your Opacity Monitor Stops Functioning, and You Can’t Operate Without One?
The Hidden Cost of Temperature Screening Using Handheld Thermometers – What You Need to Know
How to Achieve Accurate Temperature Measurement of Aluminium with Thicker Alloy-Dependent Oxide Layers in Reheating and Secondary Processing Applications
September(3)
Why Should You Use a High Definition Thermal Imaging System on a Glass Furnace?
How to Overcome the Temperature Measurement Challenges Posed by Wet-Laid and Lamination Nonwovens Production
How to Control Combustion and Monitor Emissions and Particulates for the Steelmaking Industry
May(2)
New Video – Introducing vIRalert 2 Human Body Temperature Measurement System
The Requirement for Background Radiation Compensation in Infrared Thermometry
April(1)
How to Improve Combustion Efficiency with an Acid Dewpoint Temperature Monitor
March(1)
Introducing Latest Enhancements to Slag Detection System (SDS)
February(3)
How to Take Temperature Measurements Inside a Cement Kiln
Supporting Virus Detection with Non-contact Temperature Measurement
New Video - Introducing the Latest Enhancements to SPOT
January(1)
Practical Advice on Using Portable Handheld Pyrometers for Measuring Tube Wall Temperature (TWT)
2019(15)
December(2)
Maximising Existing Processes and Plant for Sustainable Steelmaking
2019: A Year of Innovation
November(2)
What are the Benefits of Measuring Reformer Tube Wall Temperatures?
How to Optimize the Fuel / Air Ratio on a Reheat Furnace
October(1)
How To Ensure Consistent High-Quality Steel Strip Production
September(1)
Is there an alternative to an expensive wet-extractive PM monitor on a stack with a wet FGD?
August(1)
What Factors Influence the Emissivity of a Material?
July(2)
Why Service, Calibrate or Certify an Infrared Thermometer/Pyrometer?
What is the best location to detect hot material on a coal or biomass conveyor?
June(2)
How to Choose the Best SPOT Pyrometer for your Required Application?
New Video - SPOT GS - Temperature Measurement of Galvannealed and Galvanized Strip
May(1)
Reducing emissions and at the same time increasing process efficiency – is it possible?
April(2)
A Great Time to Join the AMETEK Land Team
How do I choose audit filters for my opacity monitor?
January(1)
What are the benefits of using infrared line scanners for high resolution thermal imaging applications?
2018(9)
December(1)
Solar Heating of Stack-Mounted Equipment
November(3)
Slag Detection System in Action
What do we mean by “compliance”, and why is it important?
How to accurately measure temperature for aluminium extrusion processes
September(1)
Why Use Purge Air? And What Practicalities to Consider.
August(4)
What is AMETEK Land’s Industry 4.0 Outlook?
The Top Questions...and answers on Measuring Temperature in Glass Production
Glass Tank Thermal Surveys Using Transportable NIR-B Thermal Imaging Solution
Determining Alarm Levels in Millwatch
Blog Authors
Select
ameteklandinstrumentsRegisteredUser
salespartner
staff
Region
Select
Select
David Primhak
Divisional Vice President & Business Manager
Derek Stuart
Global Product Manager
James Cross
Head of Industry Management
Jason Rushton
Application Engineer
Larry Smith
Director of Sales – Americas
Manfred Hayk
Application Support Manager EMEA
Philippe Kerbois
Global Industry Manager
FOLLOW US ON SOCIAL MEDIA
Tweets by @Landinst
MacCMS
×