Skip to content

Take a Tour Around The IMAGEPro Version 2 Software Interface

IMAGEPro V2 is the leading process control software for thermal imaging systems. Giving detailed control over thermal imaging measurements and allowing enhanced application analysing and process control.

The latest software enhancements lets users use a single or multiple thermal imaging camera, for use in a range of industries such as; glass, hydrocarbon processing, industrial processing, minerals, power generation, steel and more.

IMAGEPro V2 - New Blog


















Example: Live thermal image of slag scimming/deslagging application

The temperature reading of each pixel from the thermal image is extracted from the specific region of interest (ROI) typically providing the minimum, average and maximum live temperatures. With multiple ROI’s defined and the advanced data processing, the measurement is processed quickly and accurately and then made available to the process monitoring and control systems.

Based on the market leading IMAGEPro thermal imaging and process control software, AMETEK Land’s smart thermal imagers and systems are designed to be easily integrated into new or existing plant control and data management systems. A wide variety of digital and analog interfacing options enables online bi-directional communication and data provision, prepared for Cloud Data handling and Industry 4.0.

IMAGEPro contains a powerful integrated communications platform which allows the software to communicate with other systems, communication can be visual (such as the IMAGEPro Online or Video Stream), an electrical communication through various analog and digital IO Modules or a data exchange via ethernet protocols such as Modbus TCP, OPC UA or TCP/IP commands. Outputs are not exclusive to either approach, meaning you can output the same data via Modbus or I/O if needed. 

The available communication options for IMAGEPro V2 are as follows;

IMAGEPro Online

Online video stream

I/O-Modules (Multiple)

For analog and digital in- and outputs

Modbus

Modbus TCP is a standardised protocol built on top of TCP and is widely used for data communications

TCP

TCP/IP Commands is a custom protocol built on top of TCP/IP

OPC UA

OPC UA is a standardised protocol widely used for data communications


All interfacing and communications can be accessed and configured in the software integrated “Data Pairing” option, providing an easy and clear interface configuration.

IMAGEPro V2 - New Blog

















IMAGEPro Data Pairing configuration


Click here to learn more about IMAGEPro Version 2
 

Archives

Skip Navigation Links.
Collapse 2022(23)2022(23)
Collapse September(1)September(1)
What is Background Radiation? And Why is it Important to Compensate for it?
Collapse August(3)August(3)
Thermal Imaging Accuracy for Furnace Applications
How Long Does My Lancom 4 Probe Need to Be?
Should I Choose an Air-cooled or Water-cooled Thermal Imaging Camera for my Furnace?
Collapse July(3)July(3)
Complete Open Gateways with the NIR-B-2K-Glass Thermal Imager to Have Digital 4.0 Data Exchange and SCADA
How Do I Perform an Audit on my Opacity Monitor?
Why Should You Use AMETEK Land Application Support to Choose the Right Pyrometer Instead of Purchasing Directly From the Internet?
Collapse June(4)June(4)
What Makes Stored Biomass Self-Ignite?
Optimising Fired Heaters using Thermal Imaging Solutions
Can the LWIR-640 be Used to Monitor the Refractory Condition of a Ladle?
What Are The Key Benefits of Using a SPOT Pyrometer with a SPOT Actuator?
Collapse May(3)May(3)
Reducing Energy Consumption & CO2 Emissions by using Continuous Furnace Outside Shell Monitoring with Stationary Industrial Thermal Imaging
Take a Tour Around The IMAGEPro Version 2 Software Interface
How to Set Glass Leak Alarms with the LWIR-640 Thermal Imager and Its IMAGEPro Software?
Collapse April(2)April(2)
Will a 1 µm and 3.9 µm Pyrometer or Thermal Imager Read the Same Tube Wall Temperatures (TWTs)? If Not, Which Value is Correct?
Do I Need a NOx Converter On My Flue Gas Monitor?
Collapse March(2)March(2)
How to Use the NIR-Borescope-2K with IMAGEPro-Glass in Float Furnaces
How to Monitor the Outside Condition of a Glass Furnace?
Collapse February(4)February(4)
What Are NOx and SOx and Why Are They Important?
How to Spot Damage in Modern Lime Kilns Using Thermal Surveys
How can accurate temperature and emissions monitoring improve efficiency, quality and sustainability?
What non-contact temperature measurement technologies are being implemented into actual Industry 4.0 communications within heavy industries?
Collapse January(1)January(1)
Measuring Gas Temperatures in a Boiler with the CDA Pyrometer
Expand 2021(21)2021(21)
Expand 2020(14)2020(14)
Expand 2019(15)2019(15)
Expand 2018(10)2018(10)