Skip to content

Slag Detection System in Action

Watch Slag Detection Video
Seeing an application-specific solution in action, makes it much easier to understand how the product would integrate into your plant and process and improve the quality of your final products.

Our Slag Detection System simulation video demonstrates the accurate and rapid detection of the onset of slag carry-over. When slag appears, and exceeds an operator defined amount, an alarm is automatically triggered and the tap is terminated. 
This reduces slag carry-over, delivers improved yields, higher-quality steel and reduces costly downstream processing.

WATCH THE SIMULATION VIDEO


Find out more about our Slag Detection System (SDS)
 

Archives

Skip Navigation Links.
Collapse 2022(23)2022(23)
Collapse September(1)September(1)
What is Background Radiation? And Why is it Important to Compensate for it?
Collapse August(3)August(3)
Thermal Imaging Accuracy for Furnace Applications
How Long Does My Lancom 4 Probe Need to Be?
Should I Choose an Air-cooled or Water-cooled Thermal Imaging Camera for my Furnace?
Collapse July(3)July(3)
Complete Open Gateways with the NIR-B-2K-Glass Thermal Imager to Have Digital 4.0 Data Exchange and SCADA
How Do I Perform an Audit on my Opacity Monitor?
Why Should You Use AMETEK Land Application Support to Choose the Right Pyrometer Instead of Purchasing Directly From the Internet?
Collapse June(4)June(4)
What Makes Stored Biomass Self-Ignite?
Optimising Fired Heaters using Thermal Imaging Solutions
Can the LWIR-640 be Used to Monitor the Refractory Condition of a Ladle?
What Are The Key Benefits of Using a SPOT Pyrometer with a SPOT Actuator?
Collapse May(3)May(3)
Reducing Energy Consumption & CO2 Emissions by using Continuous Furnace Outside Shell Monitoring with Stationary Industrial Thermal Imaging
Take a Tour Around The IMAGEPro Version 2 Software Interface
How to Set Glass Leak Alarms with the LWIR-640 Thermal Imager and Its IMAGEPro Software?
Collapse April(2)April(2)
Will a 1 µm and 3.9 µm Pyrometer or Thermal Imager Read the Same Tube Wall Temperatures (TWTs)? If Not, Which Value is Correct?
Do I Need a NOx Converter On My Flue Gas Monitor?
Collapse March(2)March(2)
How to Use the NIR-Borescope-2K with IMAGEPro-Glass in Float Furnaces
How to Monitor the Outside Condition of a Glass Furnace?
Collapse February(4)February(4)
What Are NOx and SOx and Why Are They Important?
How to Spot Damage in Modern Lime Kilns Using Thermal Surveys
How can accurate temperature and emissions monitoring improve efficiency, quality and sustainability?
What non-contact temperature measurement technologies are being implemented into actual Industry 4.0 communications within heavy industries?
Collapse January(1)January(1)
Measuring Gas Temperatures in a Boiler with the CDA Pyrometer
Expand 2021(21)2021(21)
Expand 2020(14)2020(14)
Expand 2019(15)2019(15)
Expand 2018(10)2018(10)