Skip to content

What Makes Stored Biomass Self-Ignite?

Monday, June 27, 2022 | Derek Stuart
Categories : Products

Many power producers are using biomass as fuel for their boilers. Biomass comes in many forms, including corn stover, olive pulp, bagasse, and wood pellets.

Derek Stuart - Biomass BlogProvided the raw materials are sustainably sourced, biomass fuels offer a low-carbon alternative to fossil fuels such as coal and natural gas. However, these fuels present some problems that do not apply to more traditional fuels, and self-heating and spontaneous combustion are among the most problematic.

The problems arise from two exothermic processes: oxidation and biological action. Oxidation occurs when volatile components in the biomass react with oxygen in the ambient air, generating carbon monoxide and heat. The rate of oxidation depends strongly on temperature: as a general rule, it doubles for every 10 °C increase in temperature. Because of this, a runaway condition can develop where spontaneous heating causes an increase in the oxidation rate, leading to more rapid heat production. If this continues for long enough, the fuel can eventually become hot enough that it catches fire.

A second mechanism involved biological action by fungi and bacteria. In these cases, the biomass is converted to carbon dioxide and methane.  As the fungi and bacteria cause the temperature to increase, oxidation will also play a part and, again, the stored fuel can become hot enough that it can self-ignite.

Several factors contribute to the heat buildup. The size of the storage pile is significant as the heat generated can escape more easily from a small pile. Moisture content determines the likelihood of biological action, since dry biomass is not a hospitable environment for bacteria and fungi. The age of the material and its origin also play a part since freshly chopped wood contains a higher proportion of volatile, reactive material than wood that has been in storage for some time.

LWIR - 640 Thermal Imaging SolutionsIn addition to the fire risk, there are direct costs from these reactions, since they consume the raw material and reduce the amount that remains to burn in the boiler. Studies by the US Forrest Products Laboratory have shown stored wood chips lose between 0.5% and 4% of their mass per month.

Fortunately, AMETEK Land has a range of tools that can detect these reactions and give early warning that a dangerous condition could be developing. The LWIR-640 thermal imager can detect the temperature rise in open storage piles and in material stored under a dome. The Silowatch analyzer detects the carbon monoxide emitted when biomass oxidizes. And the HotSpotIR is specifically designed to detect hot material moving on a conveyor belt, so that it can be rejected before it moves into the next stage in its journey.

All biomass is susceptible to self-heating and spontaneous combustion, but careful management and accurate monitoring can minimize the dangers, allowing it to be stored and transported safely.

Click here to learn more about the Biomass Industry.

Archives

Skip Navigation Links.
Collapse 2022(28)2022(28)
Collapse November(1)November(1)
Measuring Gas Temperatures In Combustion Processes By Infrared Pyrometry
Collapse October(3)October(3)
How an Uncalibrated Optical Pyrometer Can Affect Temperature Accuracy of TMT Readings on Steam Methane Reformers
Using Transportable NIR-B-2K Imager for Thermal Surveys and Combustion Optimisation to Reduce Energy
How to Measure Low Temperatures on Shiny Metal Surfaces
Collapse September(2)September(2)
What is Background Radiation? And Why is it Important to Compensate for it?
Reinforcing Cyclops Handheld Pyrometer Uses with NIR-B-2K Thermocouple Verification and Hot Spot Monitoring
Collapse August(3)August(3)
Thermal Imaging Accuracy for Furnace Applications
How Long Does My Lancom 4 Probe Need to Be?
Should I Choose an Air-cooled or Water-cooled Thermal Imaging Camera for my Furnace?
Collapse July(3)July(3)
Complete Open Gateways with the NIR-B-2K-Glass Thermal Imager to Have Digital 4.0 Data Exchange and SCADA
How Do I Perform an Audit on my Opacity Monitor?
Why Should You Use AMETEK Land Application Support to Choose the Right Pyrometer Instead of Purchasing Directly From the Internet?
Collapse June(4)June(4)
What Makes Stored Biomass Self-Ignite?
Optimising Fired Heaters using Thermal Imaging Solutions
Can the LWIR-640 be Used to Monitor the Refractory Condition of a Ladle?
What Are The Key Benefits of Using a SPOT Pyrometer with a SPOT Actuator?
Collapse May(3)May(3)
Reducing Energy Consumption & CO2 Emissions by using Continuous Furnace Outside Shell Monitoring with Stationary Industrial Thermal Imaging
Take a Tour Around The IMAGEPro Version 2 Software Interface
How to Set Glass Leak Alarms with the LWIR-640 Thermal Imager and Its IMAGEPro Software?
Collapse April(2)April(2)
Will a 1 µm and 3.9 µm Pyrometer or Thermal Imager Read the Same Tube Wall Temperatures (TWTs)? If Not, Which Value is Correct?
Do I Need a NOx Converter On My Flue Gas Monitor?
Collapse March(2)March(2)
How to Use the NIR-Borescope-2K with IMAGEPro-Glass in Float Furnaces
How to Monitor the Outside Condition of a Glass Furnace?
Collapse February(4)February(4)
What Are NOx and SOx and Why Are They Important?
How to Spot Damage in Modern Lime Kilns Using Thermal Surveys
How can accurate temperature and emissions monitoring improve efficiency, quality and sustainability?
What non-contact temperature measurement technologies are being implemented into actual Industry 4.0 communications within heavy industries?
Collapse January(1)January(1)
Measuring Gas Temperatures in a Boiler with the CDA Pyrometer
Expand 2021(21)2021(21)
Expand 2020(14)2020(14)
Expand 2019(15)2019(15)
Expand 2018(10)2018(10)