Heating and cooling in the kiln can be monitored by taking spot measurements of the brick at key points in the process. Our solution is the SPOT M100 FO fibre-optic thermometer.
Monitoring the temperatures within the burning zone is vital for quality and efficiency. We recommend the MWIR-B-640 thermal imager and SPOT R100 thermometer for this application.
Temperature measurements at the chute confirm correct heating in the kiln, and provide information about the clinker cooling rate. The SPOT R100 thermometer is ideal for this application.
It is essential to detect any hot inclusions at the clinker cooler before they reach the conveyor belt and cause a fire risk. Our solution is the HotSpotIR linescanner.
Carbon monoxide build-ups provide the earliest warning of any combustion in coal mills. We recommend the continuous monitoring performance of the specially designed Millwatch for this application.
Coal stored prior to use in the mill presents a fire risk. Our recommended solution is the LWIR-640 thermal imager, which identifies hot spots in the coal pile.
Continuous monitoring along the length of the kiln provides an indication of any potential refractory lining problems. Our recommendation for this application is the high-resolution LSP-HD 62 linescanner.
Emissions control supports product efficiency and pollution control. Our recommended solution is the Model 4500 MkIII depending on process needs.
Controlling emissions at the stack is important for product efficiency and pollution control. AMETEK Land solutions are the Model 4500 MkIII depending on process needs.
Fluctuations in mix temperature can result in substandard product and batch rejection. The RT8B Roadstone Thermometer is AMETEK Land’s specifically designed solution for this application.