Combustion processes in many chemical processes produce emissions which must be monitored. We offer the 4500 MkIII, 4650-PM, WDG 1200, FGA and Lancom 4, depending on process needs.
Drop forging requires the temperature of metal to be monitored as pressure is applied by hammering (drop-pressing). AMETEK Land recommends the SPOT+ R100 thermometer or Cyclops 100L for this non-contact measurement.
In rotary forging, the metal is turned between hammering operations, and requires temperature monitoring. The SPOT+ R100 thermometer or Cyclops 100L is our recommended solution for measurements in this application.
Metals are heated and cooled in a planned thermal trajectory to achieve specific characteristics. We recommend the SPOT+, and MWIR-B-640 solutions for this application.
Surface hardening by directly applying a flame can be difficult to measure accurately. The Cyclops 390L and Furnace Thermometer System (FTS) use a specific waveband to overcome this issue.
Induction heat treatment is a widely used method for altering the mechanical properties of various materials, such as metals and alloys.
Lasers used for surface hardening can interfere with measurement methods. AMETEK Land recommends thermometers from our SPOT range, using a 1.6µm or 2.4µm waveband, as an ideal measurement solution.
The plasma field used in this process obscures the surface, making temperature measurements challenging. To overcome this, we recommend using the Cyclops 160L or SPOT M160 for this application.
Uneven drying patterns across the non-woven web can result in defects. AMETEK Land offers the LSP-HD 7 as our recommended solution for this application.
The uniformity and quality of lamination seams can be ensured by accurate monitoring of the hot glue temperature. The LSP-HD 7 is AMETEK Land’s recommended product for this purpose.
The recovery boiler produces emissions which must be monitored to optimize efficiency and demonstrate compliance with environmental regulations. We offer the Model 4500 MkIII and Model 4650, depending on process needs.
Early detection of hot spots on the super calender rolls helps prevent damage to the roll covers, saving tens of thousands of dollars in repairs. Our HotSpotIR scanning system is recommended.
Drying and creping at the Yankee cylinder is essential for high quality tissue paper production. AMETEK Land recommends the LSP-HD 7 linescanner for temperature monitoring in this application.
Monitoring the plastic temperature at the die exit helps control the process and ensure a consistent quality level. AMETEK Land’s LSP-HD 7 linescanner is recommended for this application.
Accurate thermal data is essential to ensure correct formation of the finished plastic product in this process. Our recommended solution is the LSP-HD 7 linescanner.
Using digital image processing, the liquid/solid boundary can be accurately monitored without careful aiming and avoiding spurious measurements from misaligned or de-focused pyrometers.
The AMETEK Land LSP-HD Linescanner system provides market leading resolution and speed resulting in the most detailed and informative thermal images, so you can detect even the smallest defects.
Non-contact infrared temperature management provides the easiest and most convenient technology platform for control of the polysilicon casting solidification process.
Reactor temperature control is critical to delivering high-purity polysilicon for use in solar cells. AMETEK Land’s recommended solution for this application is the SPOT R100 fibre-optic thermometer.
Using a plasma spray to apply a ceramic coat to an object requires thermal monitoring to ensure quality. AMETEK Land provides the Cyclops 390L or FTI-E 391 as solutions for this application.
The effectiveness of the drying process used for wood chips can be ascertained by continuous thermal monitoring at the conveyor belt. AMETEK Land recommends the HotSpotIR for this application.