Category-Listing

Category Articles : Industry

• 

  {2}

  {1} {4}

  {6}

  {3}

  Keep Reading

  {0}
• 

  What Are NOx and SOx and Why Are They Important?

  Friday, February 18, 2022 | Derek Stuart

  Industry

  The terms "NOx" and "SOx" are often seen in emissions measurement specifications, but many people are unsure of their accurate definitions. The terms come from the study of atmospheric chemistry, and each refers to a family of compounds.

  Keep Reading
• 

  How can accurate temperature and emissions monitoring improve efficiency, quality and sustainability?

  Monday, February 7, 2022 | Christopher Leonard

  Industry

  The road to industrial decarbonisation has many facets and challenges for energy-intensive industries. Temperature and emissions monitoring technology, including portable and fixed thermal imagers and gas analysers, can help improve process efficiency and enhance product quality in the power, metals, glass, HPI and cement applications.

  Keep Reading
• 

  What non-contact temperature measurement technologies are being implemented into actual Industry 4.0 communications within heavy industries?

  Wednesday, February 2, 2022 | Manfred Hayk

  Industry

  In his latest webinar, Manfred Hayk presents on new technologies, smart and intelligent functions and the latest interfaces being implemented into actual Industry 4.0 communications within heavy industries

  Keep Reading
• 

  Measuring Boiler Tube Temperature

  Thursday, September 30, 2021 | Derek Stuart

  Industry

  Boilers are used in many industrial applications ranging from power generation to municipal waste incineration as well as district heating.

  Keep Reading
• 

  Viewing Fuel Flow in a Stoker-fired Boiler

  Wednesday, August 4, 2021 | Derek Stuart

  Industry

  Stoker-fired boilers are used in many applications with thermal capacities below 50 MW. In these boilers, the fuel is fed by a stoker onto the grate, where it is ignited by heat from the refractory above. As the fuel travels down the grate, it continues to burn, with primary air coming from below.

  Keep Reading
• 

  Viewing Fuel Flow in a Fluidized Bed

  Thursday, July 15, 2021 | Derek Stuart

  Industry

  Fluidized bed boilers are used in many applications where fuels are difficult to burn. In these boilers, fuel particles are suspended in a hot, bubbling fluidity bed of ash and other particulate materials (sand, limestone etc.) through which jets of air are blown to provide the oxygen required for combustion or gasification.

  Keep Reading
• 

  Why Choose AMETEK Land to Calibrate Your AMETEK Land Instruments?

  Monday, July 5, 2021 | Gary Wolstenholme

  Products Industry Maintenance

  There are many complexities to calibrating infrared thermometers, including line scanners and thermal imagers. Expert knowledge is required on the effects of - size of source, ambient temperature, detector sensitivity (%E/°C), and more. For example, the magnitude of error caused through using a source with an emissivity less than 1.00 and calibrating thermometers by comparison operating at a different wavelength.

  Keep Reading
• 

  The Pros and Cons of Particulate Matter Monitors

  Tuesday, December 1, 2020 | Derek Stuart

  Industry

  Most large-scale combustion processes need to measure the amount of particulate matter (PM) leaving their stack. The main exceptions are those burning natural gas, which is assumed to contain no particles. AMETEK Land offers three instruments which measure PM – the 4500 MkIII, 4650-PM and 4750-PM.

  Keep Reading
• 

  What is Your Plan if Your Opacity Monitor Stops Functioning, and You Can’t Operate Without One?

  Friday, October 30, 2020 | Derek Stuart

  Industry

  The 4500 MkIII opacity monitor from AMETEK Land is designed to give many years of reliable operation but sometimes breakdowns can happen. Many processes are not permitted to operate without a functioning opacity monitor, so it is important to have a plan in place for any downtime.

  Keep Reading
• 

  The Hidden Cost of Temperature Screening Using Handheld Thermometers – What You Need to Know

  Thursday, October 22, 2020 | Christopher Leonard

  Industry

  Learn more about the hidden cost of temperature screening using handheld thermometers and how an automated technology that can dramatically cut the cost of temperature screening without compromising safety during the COVID-19 pandemic.

  Keep Reading