Category-Listing

Category Articles : Maintenance

• 

  {2}

  {1} {4}

  {6}

  {3}

  Keep Reading

  {0}
• 

  Thermal Imaging Accuracy for Furnace Applications

  Wednesday, August 3, 2022 | James Cross

  Maintenance

  During discussions on thermal imaging of large furnaces/fired heaters, I get a lot of questions about the accuracy of thermal imaging cameras when measuring tube metal temperatures (TMTs). The answer is not quite as simple as some would like.

  Keep Reading
• 

  How Do I Perform an Audit on my Opacity Monitor?

  Monday, July 11, 2022 | Derek Stuart

  Maintenance

  Ongoing quality assurance is important for any piece of measuring equipment. From a voltmeter to a spectrophotometer, calibration checks are needed to demonstrate that it is continuing to function within its design specification.

  Keep Reading
• 

  Why Should You Use AMETEK Land Application Support to Choose the Right Pyrometer Instead of Purchasing Directly From the Internet?

  Monday, July 11, 2022 | Manfred Hayk

  Maintenance

  Engineers and technicians are typically highly qualified within their fields. They know the applications and processes in detail and provide continuous support to optimise them.

  Keep Reading
• 

  Why Choose AMETEK Land to Calibrate Your AMETEK Land Instruments?

  Monday, July 5, 2021 | Gary Wolstenholme

  Products Industry Maintenance

  There are many complexities to calibrating infrared thermometers, including line scanners and thermal imagers. Expert knowledge is required on the effects of - size of source, ambient temperature, detector sensitivity (%E/°C), and more. For example, the magnitude of error caused through using a source with an emissivity less than 1.00 and calibrating thermometers by comparison operating at a different wavelength.

  Keep Reading
• 

  Why Service, Calibrate or Certify an Infrared Thermometer/Pyrometer?

  Monday, July 8, 2019 | Gary Wolstenholme

  Products Maintenance

  Thermometers by all manufactures can be subject to damage and deterioration over time. AMETEK Land thermometers/pyrometers are designed to be inherently stable while working in industrial environments, however many are operated continually with little or no maintenance after installation.

  Keep Reading
• 

  How to Choose the Best SPOT Pyrometer for your Required Application?

  Wednesday, June 12, 2019 | Dr. Fiona Turner

  Products Maintenance Industry Application

  Understanding the Range of SPOT Pyrometers Available for Non-Contact Infrared Temperature Measurement

  Keep Reading
• 

  How do I choose audit filters for my opacity monitor?

  Friday, April 12, 2019 | Derek Stuart

  Products Application Industry Maintenance

  Ongoing quality assurance is important for any piece of measuring equipment. From a voltmeter to a spectrophotometer, calibration checks are needed to demonstrate that it is continuing to function within its design specification.

  Keep Reading
• 

  Determining Alarm Levels in Millwatch

  Friday, August 24, 2018 | Derek Stuart

  Products Industry Maintenance

  AMETEK Land’s Millwatch analyzer is designed to detect the carbon monoxide (CO) given off when the fuel within a coal mill oxidizes rapidly, an indication that spontaneous combustion is beginning. This early detection gives the operator time to take preventative action such as inerting the mill or stopping the fuel supply.

  Keep Reading
• AligninganOpacityMonitor

  Friday, August 17, 2018 |

  Products Application Maintenance

  Keep Reading