4200 (Non-Compliance Dust)

AMETEK Land Opacity and Dust Monitors - 4200 Non-Compliance Dust Monitor
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). 
  • Overview +


    The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently available only in Asia.
     
    A lightweight design makes installation and positioning simple, even in challenging applications. The low-maintenance design has no moving parts – ensuring it operates reliably and continuously for immediate cost and performance benefits.

    Using a single red LED to effectively monitor hot, dirty or toxic process conditions, 4200 requires only the installation of a transceiver and retro-reflector, fitted either side of the stack. The system alternates between measurement and flood sources to eliminate drift and ensure accuracy.

    Ideally suited to multi-process plants with common exhaust stacks, the 4200 is designed for measurements in power generation, minerals, and industrial boilers.

    VERSATILE APPLICATION USE
    The 4200’s flexible and reliable measurement makes it ideal for use in a range of applications, including particulate removal systems, combustion efficiency monitoring and precipitator power optimisation.

    SIMPLE KEYPAD CONTROL
    Easy keypad operation allows straightforward access to the 4200’s functions. Setup, calibration, diagnostic and alarm settings can all be adjusted, providing optimum instrument performance for your process. Measurements can be displayed and output in % opacity or mg/m3

    CUSTOMISE TO YOUR PROCESS NEEDS
    Extensive accessories enable users to customise the 4200 to their precise process conditions. Options include air blower/mover systems and waterproof covers.

    The 4200 is AMETEK Land’s lightweight, compact monitor for dust emission concentration measurements in industrial processes and non-compliance applications.
  • Specifications +


    Measuring System
    Technique Double pass / path transmissometry
    Operating Wavelength 623 ± 20 nm
    Light source High intensity red LED
    Ranges Opacity: 0 - 20 % to 0 - 100%; 
    Dust Density: 0 - 100 to 0 to 999 mg/m3
    Linearity < 2 % of range*
    Resolution 0.1 % Opacity; 0.1 mg/m3 Dust Density
    Drift < 3 % of range per month
    Angle of Projection < 5 °
    Angle of View < 5 °
    Response Time 5 seconds to 90 % of final value
    Averaging Selectable from 1 s to 59 s, 1 min to 59 min, or 1 hr to 8 hrs
    Suitable for Stacks 0.3 to 9.7 m diameter / 1 to 32 ft
    Flange-to-flange Pathlength 0.6 to 10 m / 2 to 33 ft
    Calibration Manual zero & upscale check
    Method Built-in audit jig
    Dust
    *Performance reduced for pathlengths 
    Single calibration constant
     > 7.5 m / 25 ft
    Control Panel
    Display 4-digit; red LED
    Keypad 4 keys for data input; easy access via removable cover panel
    Status indicators System OK, Alarm, DC Power
    Environmental  
    Operating Temperature -20 to +55 °C / -4 to +131 °F
    Max. Flue Gas Temperature 600 °C / 1112 °F higher temperature available
    Max. Flange Temperature 200 °C / 400 °F
    Environmental Rating IP65 / NEMA4 
    Compliance
    Safety
    Conforms to EN 61010
    EMC Conforms to EN 50 081 and EN 50 082
    Outputs
    Analogue output 0, 2 or 4-20 mA current loop, fully isolated
    Relay outputs System OK, High Alarm
    Contact Type/Rating Isolated changeover contacts rated at 1A@24V d.c., 0.5 A@125 V a.c.  
    Electrical
    Power Supply 90 - 260 V a.c., 50/60Hz, (universal input)
    (additonal for typical purge blower 110 V or 230 V, 50 or 60 Hz, 500 W)
    Power Rating 5 W
    Air Requirements (only for air mover option)
    Instrument air 5 - 8 bar / 75 - 120 psi ; 170 Nl/min / 36 cfm  
    Mechanical Data
    Dimensions (H x W x D) Transceiver 157 x 127 x 404 mm / 6 x 5 x 16 in 
    Retro-reflector 127 x 127 x 200 mm / 5 x 5 x 8 in
    Weight
    Transceiver 5 kg / 11 lb 
    Retro-reflector 2 kg / 4.4 lb
    Options
    Air Blower/Air Mover A range of purge air supply options is available
    Fail Safe Shutter Protects the instrument if the purge air supply fails 
    Weather Covers Additional protection for severe environments
    Data Logger System Software program for logging and correction of data
    Alignment Tool Flange mounted light source and target for use during installation
    Calibration Filters Certified neutral density filters for instrument linearity check
    PDS182/10/10
  • Documentation +

  • Related Segments +

    • Biomass
      Biomass

      Biomass fuels pose specific problems in storage, production and transport. We offer thermal monitoring and carbon monoxide detection solutions designed to detect spontaneous heating and combustion in biomass applications.

      Keep Reading

    • Cement
      Cement

      The production of cement is a closely-controlled chemical process. We provide accurate, non-contact solutions for temperature monitoring, emissions control, and to ensure safety in storage and conveyor areas.

      Keep Reading

    • Chemical Processing
      Chemical Processing

      Chemical processing operations produce harmful emissions. Our range of opacity, particulate and flue gas detectors provides continuous monitoring, ensuring compliance with regulations and increased process efficiency.

      Keep Reading

    • Emissions Monitoring
      Emissions Monitoring

      Combustion processes generate harmful emissions of gases and particulate matter. We provide a range of opacity, PM and flue gas detectors for continuous monitoring, to ensure regulatory compliance and process efficiency.

      Keep Reading

    • Iron to Steel
      Iron to Steel

      Temperature monitoring is essential in determining the properties of the steel produced from iron ore. We provide the reliable instruments to support process efficiency and quality.

      Keep Reading

    • Lime
      Lime

      Lime production depends on heating limestone in a kiln, and is prone to generate emissions. AMETEK Land provides a range of emissions monitors for compliance and process efficiency.

      Keep Reading

    • Paper
      Paper

      Paper manufacture demands temperature and emissions control in several key processes. We provide the essential thermal scanning and pollution monitoring required for efficient, safe and high-quality production.

      Keep Reading

    • Waste
      Waste

      The mixture of waste used for power generation can make process efficiency difficult, and emission levels unpredictable. We provide the accurate solutions to control your process.

      Keep Reading