SDS-E - Slag Detection

AMETEK Land Fixed Thermal Imagers and Line Scanners - SDS-E - Slag Detection
The Slag Detection System (SDS) is the proven solution for accurate and timely detection of slag carryover in the steelmaking process, allowing plants to improve product quality, reduce slag carryover and improve operator safety.
  • Overview +


    With over 60 years of application expertise in the steel industry AMETEK Land’s Slag Detection System (SDS) accurately and rapidly detects the onset of slag carry-over. This fast response significantly reduces slag carryover and improves product quality.

    The AMETEK LAND Slag Detection System (SDS) delivers improved yields, higher-quality steel and reduces costly downstream processing. There are additional benefits in reduced ladle refractory wear.

    At the end of the tap the levels of slag and steel rapidly reverse. Quick termination of the tap after the alarm has been triggered is necessary to prevent excessive levels of slag in the ladle. SDS uses a high resolution thermal imaging camera to detect the transition between steel and slag. The dedicated thermal imaging camera has a specific design to survive in the harsh operating conditions and utilizes a particular wavelength to reduce “blackouts” caused by smoke and fume. Data is presented to the operator in real time enabling them to make informed decisions about the tapping process.

    Suitable for operators of secondary steel making vessels (e.g. EAF, BOF) including stainless steel. Variants of the system are also available for copper, platinum, upon request. The system can also be used to indicate freeboard height if required.

    IMPROVED PRODUCT QUALITY
    Using the SDS has been demonstrated to improve operator response time and consistency at the end of each tap. This results in a typical reduction in slag depths of up to 25% compared to traditional methods of stream monitoring.

    REDUCED DOWNSTREAM PROCESSING COSTS
    The cost of additional downstream processing time and materials can be a significant burden on an operating plant. By controlling slag carry-over this costly downstream processing can be reduced or eliminated, improving plant throughput and operating margins.

    AUTOMATIC OPERATION
    As the tap commences, the application dedicated software records it, using a stream identification algorithm, producing a data log and graph for quality control. A stream tracking mechanism is included to ensure reliable operation in typical installation conditions. When slag appears, and exceeds an operator defined amount, an alarm is automatically triggers. The system is designed to ensure accurate detection of steel/slag independent of charge weight and without operator intervention.

    The Slag Detection System is AMETEK Land’s definitive solution for monitoring and reducing slag carryover in steel production facilities. It is proven to reduce slag carryover, save money and improve operator safety. 
  • Specifications +


    Image Processing System (LIPS SDS-E)
    Slag Detection: Alarm activation when a preset percentage of either slag or steel detected within defined window
    User Display: Front page information display, plant logo and location identifier
    Frame Rate:
    30 frames/sec
    Automatic Functions: Auto tap detection, stream identification, steel/slag ratio, video file, log file of all data, steel/slag percentage graph, all saved as tap number.
    Language: User defined
    Outputs: Digital output card, DDE, OLE, Ethernet and OPC Options
    Sensor Supply Unit
    Functions:
    Local connection interface between imaging sensor and image processing system
    Cables    30/150/300 m pre-wired and labelled, greater distances to 1 km are available
    Protective Enclosure
    Service: Water, air, power input, communications, video, located to the rear of the enclosure
    Added Protection: Sacrificial plate protects the main enclosure from direct impact
    Sighting Tube: Design significantly reduces the risk of direct impact of liquid steel against the field replaceable sapphire window
    Air Bleed: Provides positive pressure within the enclosure
    Environmental Rating: IP65 
    Thermal Imaging Sensor (SDS-E) 
    Temperature Measurement Range: 600 to 2000 °C / 1472 to 3632 °F 
    Thermal Image Resolution: 384 x 288 pixels 
    Detector: Amorphous Silicon Focal Plane Array 
    Field of View: 7.5° (horizontal) x 5.5° (vertical) 
    Motorised Focusing Range: 4m / 13.1 ft to infinity 
    Temperature Resolution: 0.5 °C (for 600 °C blackbody) 
    Accuracy: ±1% absolute temperature (K) 
    Options
      Air Purge, Blower unit, Setup Monitor, Sensor Carry Case 
    SDS-E/0610
  • Documentation +

  • Related Applications +

    • Iron to Steel - Basic Oxygen Furnace
      BOF - Basic Oxygen Furnace

      A vital stage in producing low-carbon molten steel, the Basic Oxygen Furnace produces slag as a waste product. Our SDS-E slag detection system monitors the onset of slag carryover towards the end of the tap, maintaining steel quality and preventing equipment damage.

      Keep Reading

    • Iron to Steel - Electric Arc Furnace - Tap
      Electric Arc Furnace (EAF) - Tap

      The Electric Arc Furnace produces slag as a waste product. The SDS-E slag detection system monitors the onset of slag carryover towards the end of the tap, maintaining steel quality and preventing equipment damage.

      Keep Reading

    • Iron to Steel - SDS
      SDS

      AMETEK Land offers a dedicated SDS-E slag detection system to minimise the amount of slag carried over from the furnace. Early detection supports improved efficiency.

      Keep Reading