ADT - Aluminium Die

 AMETEK Land Fixed Spot Non-Contact Thermometer - ADT - Aluminium Die Thermometer
High accuracy, fast-response thermometer optimised for the measurement of the die prior to loading into the press in aluminium extrusion processes.
  • Overview +


    The ADT , based on the full featured SPOT M160 Fibre optic pyrometer is an Aluminium Die Thermometer designed specifically for measuring pre-heated dies as they are moved from the die oven to installation in the aluminium extrusion press.

    Utilising AMETEK Land’s highly accurate, non-contact measurement, adapted specifically to the unique process conditions of die monitoring, ADT prevents any process stoppage caused by loading an under temperature die – avoiding costly downtime and increasing product yields.

    Consisting of a highly accurate, SPOT R160 Fibre optic non-contact radiation thermometer  ADT’s fibre optic lightguide enables the sensor and electronics to be located away from hostile measurement locations.

    And with a range of mountings and accessories making installation simple, ADT is highly adaptable to the individual application needs of aluminium manufacturers.

    HIGH-PRECISION RESULTS
    Die temperature is vital to the extrusion process – thermometer results are within 5 °C (9 °F), and an emissivity input ensures high accuracy is maintained. A response time of 5ms allows for rapid action if the die cools too much.

    TOUGH IN HOSTILE ENVIRONMENTS
    The measurement point for this process is often located in harsh conditions:  A 3.5m (11.4ft) fibre optic lightguide keeps the electronics at a safe distance, while a full range of mountings and accessories help with installation in hostile surroundings.

    LOW MAINTENANCE, HIGH PERFORMANCE
    By using our high-quality non-contact, infrared measurements, the ADT provides low-maintenance, single-spot monitoring of the die temperature without interfering with the extrusion process.

    AMETEK Land’s ADT preheat thermometer is dedicated to the task of monitoring die temperature in aluminium extrusion.
  • Specifications +


    Specification Temperature Span 300 to 1100 °C / 600 to 2000 °F
    Wavelength 1.6μm
    Response Time 5ms (0 to 95%)
    Field of View (Nominal) 22:1
    Fibroptic Lightguide Length 3.5m/11.4ft
    Target Diameter A50 head-23mm/0.90in at 500mm/19.6in
    Accuracy Repeatability <1K
    Absolute <0.25%K + 1K
    Stability Temperature 0.2°/°ambient
    Time 2 °C / 4 °F per year
    Vibration 3G any axis, 10 to 300Hz
    Humidity 0 to 99% non condensing
    Sealing IP65
    Ambient Temperature               
       Optic Head 200 °C / 392 °F 
       Lightguide 200 °C / 392 °F 
       Detector Specified 0 to 50 °C / 32 to 122 °F 
    Operating-10 to 60 °C / 14 to 140 °F 
    CE EN 50-082-2 (immunity)
    EN 50-081-1 (emissions) 
    IEC 1010 (electrical safety) 
    Processor Type LMG AE (LMB is compatible)
    I/O Card Type System 4 I/O card
    ADT
  • Documentation +