Tag-Listing

Tag Articles : Monitoring

{2}

{1} {4}

{6}

{3}
Keep Reading

{0}
What Are the Main Benefits of IMAGEPro Advanced Thermal Imaging Software?

Monday, May 17, 2021 | Manfred Hayk

Products

In industrial applications, typically non-contact pyrometers (spot temperature measurement devices), linescanners (profile line temperature measurement devices) or thermal imagers (image temperature measurement devices) are used to quickly and accurately measure and capture temperatures.
Keep Reading
How to Monitor Batch Coverage and Crown Temperatures in a Glass Melt Tank for Optimised Daily Operations in Glass Furnaces

Wednesday, April 21, 2021 | Philippe Kerbois

Products

Installed looking into a glass melt tank, our NIR-B-2K thermal imaging camera allows 24/7 monitoring of batch melting. When coupled with our IMAGEPro-Glass advanced thermal imaging software, we enable temperature measurements of the melt line combined with hot spots on thermal profiling, batch coverage and batch transit time for recording and comparison, and the crown as well.
Keep Reading
Can I Mount my Opacity Monitor on a Positive-Pressure Duct?

Wednesday, April 7, 2021 | Derek Stuart

Products

Opacity monitors are used to measure emissions of smoke and dust from combustion sources. They are mounted directly onto the stack or duct, so a constant flow of purge air is needed to protect their delicate optics from the hot, dusty, and corrosive stack gases.
Keep Reading
How to Automatically Monitor the Condition of Vessels and Furnaces to Avoid Leaks or Identify Dangerous Outbreaks

Friday, March 12, 2021 | Manfred Hayk

Products

Refractory-lined vessels and furnaces are common in industrial applications such as petrochemicals, steel production, processing, and heat treatment. However, over time, refractory deteriorates to a point where it has to be relined.
Keep Reading
Reducing emissions and at the same time increasing process efficiency – is it possible?

Thursday, May 23, 2019 | John Gallucci

Products Application

Process operators are continuously under pressure to either reduce their emissions to the atmosphere or increase their process efficiency. Some people see these 2 factors as competing, but they don’t have to be.
Keep Reading
Why Use Purge Air? And What Practicalities to Consider

Monday, September 24, 2018 | Derek Stuart

Products Industry Application

Many AMETEK Land instruments use purge air, in the post I am going to explain the purpose and some of the practicalities surrounding this technology.
Keep Reading
Glass Tank Thermal Surveys Using Transportable NIR-B Thermal Imaging Solution

Friday, August 31, 2018 | Mark Bennett

Products Industry

A transportable version of the NIR-B glass is especially designed for customers who want to monitor and record their high temperature processes periodically.
Keep Reading
Determining Alarm Levels in Millwatch

Friday, August 24, 2018 | Derek Stuart

Products Industry Maintenance

AMETEK Land’s Millwatch analyzer is designed to detect the carbon monoxide (CO) given off when the fuel within a coal mill oxidizes rapidly, an indication that spontaneous combustion is beginning. This early detection gives the operator time to take preventative action such as inerting the mill or stopping the fuel supply.
Keep Reading